BPCKM - LUBRISIL, 91525

  • MSDS: BPCKM
  • Manufacturer: PREMIER INDUSTRIAL CORP
  • Product Name: LUBRISIL, 91525
  • National Stock Number: 9150-00N024456
Product Identification

Product ID:LUBRISIL, 91525
MSDS Date:05/11/1988
FSC:9150
NIIN:00N024456
MSDS Number: BPCKM

Responsible Party
PREMIER INDUSTRIAL CORP
4500 EUCLID AVE
CLEVELAND, OH 44103
US

Emergency Phone: 216-391-8300

Info Phone: 216-391-8300

Preparer: GFS

Cage: 18399

Contractor
PREMIER FARNELL CORPORATION
CLEVELAND, OH 44103-3736 US

Telephone: 216-391-8300

Cage: 18399

Ingredients

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 15%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT


PHOSGENE .

RTECS: 9999999ZZ


1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE

CAS: 76-13-1

RTECS: KJ4000000

Fraction By Weight: 80%

OSHA PEL 1000PPM;1250PPM STEL

ACGIH TLV: 1000PPM;1250PPM STEL

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS IN HIGH CONCENTRATION ARE
ANESTHETIC AND IRRITATE UPPER RESPIRATORY SYSTEM. EXCESS INHAL MAY
CAUSE DIZZINESS, GIDDINESS, AND NAUSEA. CHLOROFLUOROCARBON (CFC)
MATL HAVE PRODUCED/SENSITIZATION OF MYOCARDIUM TO EPINEPHRINE IN
LAB ANIMALS & COULD HAVE SIMILAR EFFECT IN HUMANS. ADRENOMIMETICS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: (E.G., EPINEPHRINE) MAY BE
CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USES IN HUMANS ACUTELY
OR CHRONICALLY EXPOSED TO CFC'S .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: IMMED FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN, &
CALL PHYS. SKIN: WASH THOROUGHLY WITH PLENTY OF SOAP AND WATER.
INHAL: IF AFFECTED, REMOVE TO FRESH AIR. INGEST: SEEK PHYS IMMED,
SHOW MSDS OR LABEL, DO NOT INDUCE VOMIT.

Fire Fighting

Flash Point:-40F,-40C
Lower Limits:2.1%
Upper Limits:9.5%
Extinguishing Media:WATER, FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXPOS TO FIRE/HEAT/PRLNG SUNLIGHT MAY
CAUSE BURST. IF USED IN CONFINED SPACES, HAZ VAP MAY SPREAD/BUILDUP
IN LOW AREAS. THERMAL DECOMP MAY INCL (SUPP DATA)

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREA. CLEAN UP WITH ABSORBENT MATERIAL. CONTAIN AND PICK-UP WASTE
MATERIALS. PUT IN SEALED CONTAINER. DO NOT PUNCTURE, INCINERATE (OR
BURN) CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM
HEAT/SPARKS/FLAMES/SOURCES OF IGNIT. AVOID PRLNG/RPTD BRTHG OF GAS,
FUMES, VAP/SPRAY MIST. AVOID PRLNG/RPTD CONT W/SKIN.
Other Precautions:IN CASE OF ACCIDENT/ILLNESS, SEEK PHYS IMMED. SHOW
LBL/MSDS. CONT W/FLAME/HOT SURF MAY PRDCE TOX GASES. DO NOT
PUNCTURE, INCINERATE (OR BURN) CONTR. KEEP OUT OF REACH OF
CHILDREN. ALWAYS READ & FOLLOW DIREC ON PROD LBL. ADDNL (SUPP
DATA)

Exposure Controls

Respiratory Protection:USE ONLY WITH ADEQUATE VENTILATION. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL/MECHANICAL: RECOMMENDED.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IF VENTILATION IS INADEQUATE, WEAR
NIOSH/MSHA APPROVED RESPIRATORY EQUIPMENT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:CHLORIDES/FLUORIDES & PHOSGENE. OTHER PREC:TECH DATA SHEETS
&/OR MATL SFTY DATA SHEET ARE AVAIL UPON REQUEST. FOR PROFESSIONAL
& INDUST USE ONLY. NO SMOKING IN AREA OF USE. DO NOT USE IN GEN
VICINITY OF ARC WELD, OPEN FLAMES/HOT SURF. HEAT &/OR UV RADIA MAY
CAUSE FORM OF CHLORIDES, FLUORIDES & (ING 3)

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:-44F,-42C
Vapor Pres:4.7 ATM
Vapor Density:1.6
Spec Gravity:1.57
Evaporation Rate & Reference:<1(ETHER=1)
Solubility in Water:NIL
Appearance and Odor:AEROSOL LIQUID, FLUOROCARBON ODOR.
Percent Volatiles by Volume:95

Stability

Stability Indicator/Materials to Avoid:YES
ALUMINUM OR REACTIVE METALS.
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS, FLAMES OR
SOURCES OF IGNITION.
Hazardous Decomposition Products:CHLORIDES, FLUORIDES, PYROLYSYS
PRODUCT. PHOSGENE

Disposal

Waste Disposal Methods:DISPOSE OF WASTES IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.